Get Jingling Traffic Software Direct Download.This Software provide you hits on your web site .You can improve your Alexa.
1/ The first and main tab. You’ll use this one pretty much all the time.
2/ 2nd tab, it’s point is to add
link with more precise control, there you can specify a daily flow
amount, that kind of things. Not really useful.
3/ 3rd tab : Involving QQ. If you ever need this, you probably can understand chinese, and you’re not reading this guide.
4/ The number of sites you can add. Based on your computer’s performance. Goes between 1 and 6.
5/ The are where you’ll be able to manage your links. More on that later.
6/ That button is used to add a new
link into Jingling. The 2nd button next to it is to add a link with more
control over flow. 2nd one is pretty useless for us as well.
7/ Random information. You don’t care about this at all.
Okay. Now this should be a little more clear. Now let’s talk about adding a link, and change its settings.
To add a link, you click on the button marked “6” on the previous
screenshot, you past your link in, and press the OK button (it’s the one
on the left.).
Your site should now show up in the 5th panel.
Let’s see what we got here.
1/ Edit your link button. Pretty simple.
2/ Amount of view your site got. Resets every day. Not 100% accurate.
3/ State of your link. Basically, green is good, red is bad.
4/ Use this to put a link on pause. It’ll ask for a confirmation. Just press it again afterwards to restart it.
5/ Delete your link. Simple as well.
6/ Control flow based on time. This
will open a window with a panel divided into 24 hours, and you’ll be
able to limit traffic based on hours of they day. Not that useful for
most users. However, if you have to use it, it’s pretty straigh forward.
The buttons in the bottom are, from left to right : Save, Default,
Reset, Cancel.
7/ Traffic origin configuration. Now
that’s a useful tab. Allows you to get traffic worldwide, from China
only, or everywhere except China. More on that later too
8/ Advanced configuration. That’ll be explained as well.
Traffic origin
To access that, click on the button 7 on the main tab. Here’s what you get :
1/ Worldwide traffic.
2/ Both of them are Chinese only traffic.
3/ Western traffic only. This will what you’ll use mostly.
4/ Custom traffic. Allow you to customize traffic, Chinese regions only, so not users here.
So, if you wanna set Jingling to western traffic only, you just have to
tick box 3, and save. The four buttons are, from left to right : Save,
Default, Reset, Cancel.
Link configuration
Now that the source of your traffic is configured, let’s see what we got
in advanced configuration. To access it, press button marked 8 on main
tab.
1/ IPV ratio : Number of sub-pages an IP will visit. 1:1 means it will only access the link, and exit. 1:2
means it’ll go the the link, find a sub-page and clic on it. 1:3 means it will go on main link, find a sub-page, click, find a sub-sub page, and
click.
2/ That will configure the behavior of your links : The first box will behave with the IPV ratio, clicking on random links on the page. The 2nd one will reload the page only. The 3rd one will access a sub-page, then open the original link again. The 4th will search for a matching sub-page : you can enter what you want in the textbox, the bot will search for it, and access it if it can find it.
3/ Enable or disable popup. Enable it if you site has popups in it. If you’re not sure, I’ll talk about the Jingling link testing tool later on. If you have popups, you want to
set it a 20%.
4/ That’s the destination configuration. Used to redirect traffic after a page load. You can add up to 5 links here, and configure a % for each link.
5/ That’s the referrer. You can change the referrer URL here. Add up to 20 links, and chose it’s %. For instance, if you set 50% on twitter.com and 50% on Facebook.com, you’re going to have half of your traffic coming from each of these sites.
Add a link with visits flow control
Using Jingling, you can also add a link and configure the amount of visitor you’re going to get. To do that, you will have to switch to the
second tab on Jingling (button #2 on the first image on this post), and click to add a new website. You’re going to end up on this page :
1/ Add here your link URL.
2/ This is the amount of time the visitor will sped on your link. Configure as needed.
3/ Amount of visitor per day. If you want more than 600, add your URL in the first tab of the software. Note that the amount of view will be multiplied by your IPV ratio. If each visitor is set to view 3 sub pages, you’re going to have 3 times the visits.
4/ IPV ratio. Same as before, refer to the explanation earlier.
5/ Traffic source. Refer to the information earlier in the post as well.
One you have added a link with this tool, the buttons to configure flow based on time (#6 on my second image) will be disabled. That’s normal.
Password = 123456
Tutorial In English Guide Jingling
2/ 2nd tab, it’s point is to add
link with more precise control, there you can specify a daily flow
amount, that kind of things. Not really useful.
3/ 3rd tab : Involving QQ. If you ever need this, you probably can understand chinese, and you’re not reading this guide.
4/ The number of sites you can add. Based on your computer’s performance. Goes between 1 and 6.
5/ The are where you’ll be able to manage your links. More on that later.
6/ That button is used to add a new
link into Jingling. The 2nd button next to it is to add a link with more
control over flow. 2nd one is pretty useless for us as well.
7/ Random information. You don’t care about this at all.
Okay. Now this should be a little more clear. Now let’s talk about adding a link, and change its settings.
To add a link, you click on the button marked “6” on the previous
screenshot, you past your link in, and press the OK button (it’s the one
on the left.).
Your site should now show up in the 5th panel.
Let’s see what we got here.
1/ Edit your link button. Pretty simple.
2/ Amount of view your site got. Resets every day. Not 100% accurate.
3/ State of your link. Basically, green is good, red is bad.
4/ Use this to put a link on pause. It’ll ask for a confirmation. Just press it again afterwards to restart it.
5/ Delete your link. Simple as well.
6/ Control flow based on time. This
will open a window with a panel divided into 24 hours, and you’ll be
able to limit traffic based on hours of they day. Not that useful for
most users. However, if you have to use it, it’s pretty straigh forward.
The buttons in the bottom are, from left to right : Save, Default,
Reset, Cancel.
7/ Traffic origin configuration. Now
that’s a useful tab. Allows you to get traffic worldwide, from China
only, or everywhere except China. More on that later too
8/ Advanced configuration. That’ll be explained as well.
Traffic origin
To access that, click on the button 7 on the main tab. Here’s what you get :
1/ Worldwide traffic.
2/ Both of them are Chinese only traffic.
3/ Western traffic only. This will what you’ll use mostly.
4/ Custom traffic. Allow you to customize traffic, Chinese regions only, so not users here.
tick box 3, and save. The four buttons are, from left to right : Save,
Default, Reset, Cancel.
Link configuration
Now that the source of your traffic is configured, let’s see what we got
in advanced configuration. To access it, press button marked 8 on main
tab.
1/ IPV ratio : Number of sub-pages an IP will visit. 1:1 means it will only access the link, and exit. 1:2
means it’ll go the the link, find a sub-page and clic on it. 1:3 means it will go on main link, find a sub-page, click, find a sub-sub page, and
click.
2/ That will configure the behavior of your links : The first box will behave with the IPV ratio, clicking on random links on the page. The 2nd one will reload the page only. The 3rd one will access a sub-page, then open the original link again. The 4th will search for a matching sub-page : you can enter what you want in the textbox, the bot will search for it, and access it if it can find it.
3/ Enable or disable popup. Enable it if you site has popups in it. If you’re not sure, I’ll talk about the Jingling link testing tool later on. If you have popups, you want to
set it a 20%.
4/ That’s the destination configuration. Used to redirect traffic after a page load. You can add up to 5 links here, and configure a % for each link.
5/ That’s the referrer. You can change the referrer URL here. Add up to 20 links, and chose it’s %. For instance, if you set 50% on twitter.com and 50% on Facebook.com, you’re going to have half of your traffic coming from each of these sites.
Add a link with visits flow control
Using Jingling, you can also add a link and configure the amount of visitor you’re going to get. To do that, you will have to switch to the
second tab on Jingling (button #2 on the first image on this post), and click to add a new website. You’re going to end up on this page :
1/ Add here your link URL.
2/ This is the amount of time the visitor will sped on your link. Configure as needed.
3/ Amount of visitor per day. If you want more than 600, add your URL in the first tab of the software. Note that the amount of view will be multiplied by your IPV ratio. If each visitor is set to view 3 sub pages, you’re going to have 3 times the visits.
4/ IPV ratio. Same as before, refer to the explanation earlier.
5/ Traffic source. Refer to the information earlier in the post as well.
One you have added a link with this tool, the buttons to configure flow based on time (#6 on my second image) will be disabled. That’s normal.
Download Jingling v4.04 Direct Download (Latest Release)
Password = 123456
No comments:
Post a Comment